Peenya, Bengaluru, Karnataka
Send E-mail
Send SMS
Home»What We Offer»

New Items


REQUEST CALLBACK
Get Best Quote

Approx. Rs 24,000  / Unit(s) Get Latest Price

Current to Pressure Trainer setup comprises of a I to P converter fitted on a base. Two pressure gauges are fitted one at the input side and the other at the output of the I to P converter. A current source with digital display is provided to excite the I to P converter. A constant air supply should be provided to the system at 20 PSI pressure from a standard compressor.

Specification:
Air Input:20 PSI Constant air supply from a compressor.
Air Output: 3 to 15 PSI
Current Source:4-20 mA generator with digital display.Current variable through potentiometer.

Pressure Gauge:Bourdon type pressure gauge of 30 PSI range 2-No's
Optional:Air compressor with air regulator to suit the requirement.

Additional Information:
  • Item Code: UITM-16
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1 Lakh  / Unit(s) Get Latest Price

Control Valve trainer comprises of globe type control valve (½”) with diaphragm type Pneumatic actuator. The control valve is of linear / Equal% type. The setup comprises of water pump with necessary flexible piping, Water tank, I to P converter, Air regulator fitted on a table top powder coated metal frame.

Digital 4 – 20mA variable current source is provided to control the I/P converter. Rota meter is provided to measure the flow rate at which changes as per the valve opening. Detail Manual will be provided to conduct experiment.

Note : Range between Rs. 100000 to 140000

SPECIFICATION

Valve TypeGlobe valve ½” Body CI/SS
Control TypeLiner or Equal % ( or both as per order)
Travel Length15 to 18mm
ActuatorPneumatic actuator with Positioned input pressure 3 to 15 PSI
Pressure ControllerI to P Converter, input 4 to 20 mA, Output 3 to 15 PSI inlet

Pressure 30 PSI
Water Circulation0.5HP Mono block pump with necessary tubing
Flow SensorRota meter 50 to 1500 liters
Storage TankSS tank of capacity 20 liters approximately
Power230V +/-10% @ 50 Hz
Mounting FrameTable top Powder coated Metal frame

Dimension(650 x 500 x 700) (L x B x H) approximately
Accessories (Optioanl)Air compressor

- Turbine flow meter in leiu of Rotameter

- LVDT with Displacement Indicator for Stem travel measurement
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 12,000  / unit Get Latest Price

Capacitance Trainer Model: UITM-011

Our company is engaged in manufacturing of Capacitance Trainer Model: UITM-011 that helps in understanding working of is the best trainer to demonstrate the use of capacitance as a transducer. The parallel plate capacitor is used as a displacement sensor, which measure the displacement and the other capacitance transducer is used for measurement of angular displacement.

 

The setup:

 

  • Two plates (A1), one fixed to the base and the other moving over the fixed plate parallel with a small gap between the two

  • The over lapping of the plate will act as a capacitor with air as dielectric media

  • The parallel plate capacitor is used as a displacement sensor, which measure the displacement

  • The other capacitance transducer is used for measurement of angular displacement

  • Gang condenser is used to measure the angular displacement

  • Here the thin aluminum plates are fixed to one pole between these plate thin aluminum plates of same dimension overlap as the other pole on which the plates are mounted. The front panel of the instrument is designed in such a way that the schematic circuit diagram of the

  • capacitance indicator is shown

  • All test points are brought outside to enable the student to understand the working of the instrument properly

  • The system is self-explanatory and all necessary accessories will be supplied along with the kit

 

Specification:

 

  • Sensor: Parallel plate capacitor/Angular Plate capacitance

  • Sensor Material: Aluminum plates

  • Dielectric Medium: Air

  • Displacement: 0 to 50mm / 0-900

  • Accuracy: 5 to 10%

  • Display: 3.5 digit LED display to read +/- 1999 counts for +/- 20mv FSD

  • Power: 230V +/- 10% 50 HZ

Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 22,000  / Unit(s) Get Latest Price

This table top model comprises of two pressure chambers. One for high pressure and another for low pressure. The two pressure chambers are fitted with pressure gauges. The differential pressure transmitter is connected to the two chambers. The pressure is built by a foot air pump. Digital instrument is provided to indicate the differential pressure with transmitter output.

ModelUITM 21.
Pressure Range0-15 PSI.
Different Pressure SensorPiezoresistive type 0-30 PSI Sensor.
Different SetupTwo Pressure chambers coupled with valve in between.
Display3½ digit LED display.
Transmitter O/P4-20mA for 0 to 15 PSI.
Display Resolution0-1mA Pressure 0.1 PSI.
AccessoriesFoot air pump to build pressure.Necessary cable & Fixtures.
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.1 Lakh  / Unit(s) Get Latest Price

Electrical control of double acting cylinder by solenoid
valve.

  • Sequencing of two double acting cylinder by two solenoid valves.
  • Time delay in above.
  • Logic circuits - AND, NOT, OR, NAND, NOR.
  • Feed and Traverse circuit-quick return mechanism - shaper.
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 80,000  / Unit(s) Get Latest Price

Unitech’s Temperature Control Loop Setup is basically a PC based PID controller setup used for closed loop and open loop analysis of temperature process system. The setup comprises of RTD temperature Sensor. The water flows through the Rota meter and Process tank to which a heating coil is fitted. The heater is controlled by a Thirstier drive. The Thirstier drive is connected to PID controller. The manual control valve can control the water flow. The system is mounted on a tabletop model with all necessary Piping. Water at approx. 100 LPH has to be supplied to a system externally. The electronic panel comprises of ADC/DAC card with RS-232 interfaces.

Software is provided for experimentation, Control action like PD, PI, PID can be conducted. Online data acquisition, trend plot are the salient feature of the system. Off line analysis, Printing of data graph can be done easily. The software is compatible with windows XP operating system. Detail Manual will be provided to conduct experiment.

SPECIFICATION

Temperature TransmitterRTD(PT-100)
Capacity0-100 degree C Output-4-20mA
Water Heater3kw at 1 to 2 LPM Maximum 100 degree centigrade.
Water CirculationFHP pump with necessary piping (Flexible type).
Source TankSS Tank of capacity 20 ltrs (approximately)
Thirstier CardThirstier power controller capacity 3 KW, Input-4-20mA Output 0 to 230 V Ac.
Water ControllerManual control valve to control water flow rate.
Power230V 50 Hz.
MountingMounted on a Powder coated metal frame (approximately 650X500X750 LXBXH)
ControllerPC based dedicated PID software to control the process, control Action P,PI,PID. Trend plot with on line and off line, Printing and analyss.
Accessories(Optional)- Digital Temperature Indicator with Retransmission output

- Hot air Oven of 12” x 12” (upto 200 Deg C) in lieu of Water Heater

- Personal computer with latest features.
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 15,000  / Unit(s) Get Latest Price

Our range of Resistance Measurement Trainer (Model: UITM-09) comprises of potentiometer to vary the resistance with respect to the angular displacement with digital indicator to read the resistance change in the potentiometer. These have a power of 230V 50 Hz and have an angle of variation of 0 to 2700.

 

Specification:

 

  • Resistance Source: 10 K Ohms single turn potentiometer

  • Accuracy of Potentiometer: 5%

  • Displacement Linear: 0 -20 mm

  • Angular: 0 - 270o

  • display: 31/2 Digit LED display of 200mV FSD

  • Power: 230V 50Hz.

  • Angle of Variation: 0 to 270o

Yes! I am Interested
X
 

Download Brochure
Explore more products
Unitech Scales And Measurements Pvt. Ltd

Prasanna Kumar N. M.(CEO)
No. 36, Balaji Nagar, Thigalarapalya Main Road, Peenya 2nd
Bengaluru - 560058
Karnataka, India
Send Email
© Unitech Scales And Measurements Pvt. Ltd. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited