Measurement and Trainer Equipment

Pressure Measurement Trainer (Model: UITM-05)

We are engaged in providing Pressure Measurement Trainer (Model: UITM-05), which is equipped with display unit comprising of inbuilt power supply, strain gauge signal conditioner, amplifier and analog to digital converter. The power supply provides power for signal conditioning and amplifiers, ADC and also for strain gauge excitation.

The setup:

• The setup comprises of air pump (Foot pump) to build pressure

• A bourdon tube dial gauge will be fixed to the pressure chamber parallel to the pressure transducer

• Pressure transducer is of diaphragm type on which strain gauges will be bonded

Display unit:

• The display unit comprises of inbuilt power supply, Strain gauge signal conditioner, amplifier and Analog to Digital converter

• The power supply provides power for signal conditioning and amplifiers, ADC and also for strain gauge excitation

• The system provides front panel bridge balancing through potentiometer adjustment

• The instrument is calibrated to read the pressure directly in Kg/cm2

• The whole system is self-contained with all accessories included

• The instrument is enclosed in a tapered fiberglass box and all necessary test points are brought out with schematic circuitry for understanding the working of the instrument.

Temperature Measurement Trainer :

Our company is manufacturing and supplying an extensive range of Temperature Measurement Trainer (Model: UITM-03) that is designed in such a way that it helps understanding in working of temperature transducers like thermocouple, RTD, thermistor and their working principle. Further, our range has a 31/2 digit digital LED display of 200mVFSD.

Setup:

• The System comprises of a small water Kettle as a temperature source up to 1000C with Thermocouple, RTD and Thermistor to sense the temperature

• Digital Indicator of 31/2 digit is supplied along with the sensor to indicate the temperature in degree centigrade

• The front panel of the instrument is designed in such a way that the schematic circuit diagram of the temperature indicator is shown

• All test points are brought outside to enable the student to understand the working of the instrument properly

• The system is self-explanatory and all necessary accessories will be supplied along with the kit

Speed Measurement Trainer (Model: UITM- 07)

We offer an extensive range of Speed Measurement Trainer (Model: UITM- 07), which comprises of a DC Motor, which is fixed rigidly on a strong metal stand. It is equipped with four digit digital tachometer is provided along with the above setup which is calibrated to read the speed up to 1500 RPM.

The setup:

• The system comprises of a small 12V DC Motor, which is fixed rigidly on a strong metal stand

• The motor runs by 12V DC supply.

• Potentiometer is used to controls the speed of the motor

• Two tone wheels of sixty teeth are fixed to the motor shaft, one is of MS material and the other is of copper

• Magnetic pickup speed sensor is fixed at a distance of 2 to 2.5mm away from the teeth of the MS tone wheel, which senses the speed

• A Photoreflective sensor id mounted across the topper tone wheel so that the wheel rotates between the sensor and the infra red LED source

Display unit:

• Four digit digital tachometer is provided along with the above setup which is calibrated to read the speed up to 1500 RPM

• The meter will accept the signals from both magnetic pickup and photo sensor one at a time

• Selection switch is provided to select the sensor on which the experiment has to be conducted

• Air Input:20 PSI Constant air supply from a compressor.
• Air Output: 3 to 15 PSI
• Current Source:4-20 mA generator with digital display.Current variable through potentiometer.
• Pressure Gauge:Bourdon type pressure gauge of 30 PSI range 2-No's
• Optional:Air compressor with air regulator to suit the requirement.Air Output: 3 to 15 PSI
• Current Source:4-20 mA generator with digital display.Current variable through potentiometer.
• Pressure Gauge:Bourdon type pressure gauge of 30 PSI range 2-No's
• Optional:Air compressor with air regulator to suit the requirement.

Capacitance Trainer Model: UITM-11A

Our company is engaged in manufacturing of Capacitance Trainer Model: UITM-011 that helps in understanding working of is the best trainer to demonstrate the use of capacitance as a transducer. The parallel plate capacitor is used as a displacement sensor, which measure the displacement and the other capacitance transducer is used for measurement of angular displacement.

The setup:

• Two plates (A1), one fixed to the base and the other moving over the fixed plate parallel with a small gap between the two

• The over lapping of the plate will act as a capacitor with air as dielectric media

• The parallel plate capacitor is used as a displacement sensor, which measure the displacement

• The other capacitance transducer is used for measurement of angular displacement

• Gang condenser is used to measure the angular displacement

• Here the thin aluminum plates are fixed to one pole between these plate thin aluminum plates of same dimension overlap as the other pole on which the plates are mounted. The front panel of the instrument is designed in such a way that the schematic circuit diagram of the

• capacitance indicator is shown

• All test points are brought outside to enable the student to understand the working of the instrument properly

• The system is self-explanatory and all necessary accessories will be supplied along with the kit

Light Dependant Resister (LDR) Trainer Model: UITM- 08

Our Light Dependant Resister (LDR) Trainer Model: UITM- 08 is an experimental setup to study the characteristics of LDR and its behavior with respect to light intensity. These are fixed to movable rod inside a metal tube where a bulb is fixed at the other end.

The setup:

• The whole setup is mounted on a base where the experiment can be conducted

• As a study project the indicator is settable to display the distance moved by the LDR with respect to the light source

• The instrument is calibrated to reach distance to a max of 50mm

• Scale is provided to verify the display reading

• The intensity of the light can be varied by varying the excitation voltage to the bulb and also by moving the LDR near and away from the bulb

Strain Measurement Trainer (Model: UITM-01)

We are engaged in offering Strain Measurement Trainer (Model: UITM- 01), which comprises of stainless steel beam firmly fixed at one end and the other end is free to load. Our range is available in various dimensions, resolution and power supply’s as per the clients specific requirements. The main features of the strain indicator are front panel strain gauge bridge balancing with the help of potentiometer and the whole system is self-contained with all accessories included.

Features:

• The fixture is mounted on a base plate rigidly

• Four strain gauges are bonded on the beam and are connected in the form of whetstone bridge

• Terminals are brought out through five different color sockets to connect easily

• A pan & weight up to 1 Kg in steps of 100gms will be supplied for loading the cantilever beam

Display unit:

• Digital strain indicator will be supplied along with the cantilever beam setup to measure the micro strain

• The instrument comprises of inbuilt power supply for self and also for the strain gauge

• excitation, strain gauge signal conditioner and amplifier and 31/2 digit analog to digital converter

• The main features of the strain indicator are front panel strain gauge Bridge balancing with the help of potentiometer

• The whole system is self-contained with all accessories included

• The instrument is enclosed in a tapered fiberglass box and all necessary test points are brought out with schematic circuitry for understanding the working of the instrument