Peenya Balaji Nagar, Bengaluru, Karnataka
Send E-mail
Send SMS
Home»What We Offer»

Control Lab Equipment

Leading Manufacturer of level control loop trainer model (ulp-24p, current to pressure measurement trainer, pressure to current measurement trainer, flow control set up using pid controller ulp-25o, pressure control setup using pid controller (ulp-26) and conductivity type level controller (ulp-29) from Bengaluru.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.2 Lakh  / Unit(s) Get Latest Price

Unitech’s Level Control Setup comprises of acrylic measuring tank fitted with Level transmitter, control valve, I to P converter, source tank with water pump and necessary flexible piping for water circulation. The system is mounted on a table top powder coated metal frame. Level transmitter is of capacitance or DPT type sensor. The electronic panel comprises of ADC and DAC card with RS-232 interfaces.

Software is provided for experimentation, Control action like PD, PI, PID can be conducted. Online data acquisition, trend plot are the salient feature of the system. Off line analysis, Printing of data graph can be done easily. The software is compatible with windows XP operating system. Detail Manual will be provided to conduct experiment.

Level SensorPressure Transmitter (ULP-24P) / Capacitance type (ULP24C)
Measuring TankAcrylic tank of 30cm length(5 liters capacity)
Water CirculationFHP pump with necessary piping (Flexible type)
Source TankSS Tank of capacity 20 liters (approximately)
Control Valve1/2” Globe Valve (Linear) 15mm Stem Travel
ActuatorPneumatic Actuator input 3 to 15 PSI
I to P ConverterInput 4-20mA output 3-15 PSI
PC Interface card16 Bit ADC (8 Ch) with 12 bit DAC interfaced with PC Through RS-232/ USB Port
Power Supply230V 50 HZ
Pressure GaugesBourdone Pressure Gauge

0 to 100 PSI -1 No., 0 to 30 PSI - 1 No
Manual bypass ValuesManual ½”Gate Valve
Flow MeasurementRotameter (1500 LPH)
MountingMounted on a Powder Coated metal frame (Approx.650 x 500 x 750. L x B x H)
ControllerPC based dedicated PID software to control the process, control Action P,PI,PID. Trend plot with on line and off line, Printing and analysis
Accessories (Optional)- Digital Level Indicator with Retransmission output

- Air Compressor

- Personal computer with latest features
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 24,000  / Unit(s) Get Latest Price

Current to Pressure Trainer. This setup comprises of a I to P converter fitted on a base. Two pressure gauges are fitted one at the input side and the other at the output of the I to P converter. A current source with digital display is provided to excite the I to P converter. A constant air supply should be provided to the system at 20 PsI Pressure from a standard compressor.

Model UITM-16
I to P Input 4 to 20mA. Output 3 to 15 PSI
Air Pressure Required 30 to 80 PSI continues.
Pressure Gauge Bourdon pressure gauge 30 PSI 4”-2 No’s
Current Force
Display 3½ digit LED display.
Current o/p 4 to 20mV Variable by a potentiometer.
Resolution 0-1mA
Power Supply 230V 50 Hz
Accessories Supplied Air Regulator with fitter. Necessary tubings and cable.
Optional Air compressor at extra cost.
Yes! I am Interested
REQUEST CALLBACK

Approx. Rs 13,000  / Unit(s) Get Latest Price

Pressure to Current (P to I ) Trainer:This setup comprises of pressure chamber fitted on a base board. A pressure transducer and bourdon pressure gauge are fitted to the chamber. Digital pressure indicator with transmitter output is provided to display the pressure sensor by the pressure transducer. Transmitter output 4 to 20mA can be measured by a current meter. Foot air pump is provided to build the pressure.

Model UITM-17
Pressure Source Air tank fitted with pressure gauge.
Pressure Transmitter Strain gauge/piezo resistive type.

Pressure transmitter with 4-20mA output for 0 to 15 PSI.
Indicator 3½ digit LED display.
Display Current 4-20mA

Pressure-0-30-0 PsI
Resolution 0.1mA and 0.1PSI
Power Supply 230V 50 Hz
Accessories Supplied Foot air pump to build pressure.
Get Best Quote
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Flow Control Setup Comprises of a Orifice with DPT to measure flow Rate. The flow of water is controlled by Control Valve with pneumatic actuator. I to P converter is provided to control the actuator. Rotameter is provided to measure actual flow rate. The system is mounted on a table top model with all necessary piping.

The electronic panel comprises of ADC/DAC card with RS-232 interfaces is provided for interface the system with computer.

Software is provided for experimentation, Control action like PD, PI, PID can be conducted. Online data acquisition, trend plot are the salient feature of the system. Off line analysis, Printing of data graph can be done easily. The software is compatible with windows XP operating system. Detail Manual will be provided to conduct experiment.

Flow Sensor(a) Orifice with DPT (ULP-25O).

(b) Turbine type flow Meter (Paddle Wheel) (ULP-25T)
Water CirculationFHP Pump with necessary piping (Flexible type)
Source TankSS Tank of capacity 20 lt (approximately)
Control Valve1/2” Globe valve (Linear) 15mm Stem travel.
ActuatorDiagram type Pneumatic Actuator input 3 to 15 PSI
I to P ConverterInput 4-20mA output 3-15 PSI supply air pressure upto 60 PSI.
PC Interface card16 Bit ADC (8 Ch) with 12 Bit DCA interface withPC through RS232 USB Port.
Power Supply230V 50 Hz
Pressure GaugesBourdon Pressure gauge 0-100PSI-1 No, 0-30PSI- 1 No
Manual Bypass valveNeedle valve (1/2”) for Manual Bypass.
Flow MeasurementRotameter (1500 LPH), Digital Indicator(Optional)
MountingMounted on a powder coated metal frame (appi 650x500x750 LxBxH)
ControllerPC based dedicated PID software to control the process, control.

Action P, PI, PID, Trend plot with online and off line analysis.

Printing and analysis.
Accessories (Optional)- Digital Flow Indicator with Retransmission output

- Air Compressor

- Personal computer with latest features.
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.1 Lakh  / Unit(s) Get Latest Price

Unitech’s Pressure Control Setup comprises of Pressure tank fitted with pressure transmitter to measure the pressure. The pressure is controlled by a pneumatic control valve operated by a I to P converter. The whole system is mounted on a Table top Model with all necessary Piping. The electronic panel comprises of ADC/DAC card with RS-232 interfaces.

Software is provided for experimentation, Control action like PD, PI, PID can be conducted. Online data acquisition, trend plot are the salient feature of the system. Off line analysis, Printing of data graph can be done easily. The software is compatible with windows XP operating system. Detail Manual will be provided to conduct experiment.

SPECIFICATION

Pressure Transmitter Strain gauge / Piezo-resistive based Pressure transmitter
Capacity 100 PSI – O/P – 4-20mA
Pressure Tank MS tank with powder coating capacity-10Kg/cm2
Control Valve 1/2” Globe valve(Linear) 15mm Stem Travel
Actuator Pneumatic Actuator input 3 to 15 PSI
I to P Converter Input 4-20mA Output 3-15 PSI
PC Interface Card 16 Bit ADC(8 Ch) with 12 Bit DAC interface with PC through RS-232 Serial Port
Pressure Gauge Bourdon Pressure Gauge
Manual Release Valve 0-100 PSI-1No, 0-30PSI-1 No
Power Manual ½” gate valve
Pressure Measurement 230V 50 Hz
Controller Digital Indicator with Retransmission output (Optional)

PC based dedicated PID software to control the process, control action P,PI,PID. Trend Plot with online and off line analysis, Printing and analysis
Accessories (Optional) - Digital Pressure Indicator with Retransmission output

- Air Compressor

- Personal computer with latest features
Yes! I am Interested
REQUEST CALLBACK

Approx. Rs 35,000  / unit Get Latest Price

Unitech make conductivity type level controller comprises of a measuring tank made of acylic materials.

Fitted with high and low level conductivity probes to detect the water level. A source tank Acylic source/sump tank is provided fitted with sump low conductivity probe for low level detection. The water is circulated using a FHP water pump with necessary flexible piping arrangement.The controller is a microcontroller based device with water level indication through LED. The system works on 230V mains.

SPECIFICATIONS


Sensorconductivity type level sensor
Measurement tankAcylic level tank of length 300mm(1-2 litre approximate)
Water pumpA small submersible pump
Water circulationFlexible hose pipe for water circulation.
ControllerMicrocontroller with relay
Power supply230V
Get Best Quote
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK

Approx. Rs 70,000  / unit Get Latest Price

Unitech on/off temperature control module through relay with present value and set value display.

Thermocouple is used for sensing the temperature. Kettle / hot air oven will be provided as a temperature source. Experiments can be conducted for temperature measurement relay controlling and hysteresis measurement temperature overshoot detection the system is a self contained table top module.

SPECIFICATION

Sensor J type thermocouple with 6mm dia SS tube sheeting.
Temperature range 100°c / 200°c
Temperature source water kettle (100°c max) Hot air oven (200°c max)
Display 3 ½ digit led display
Set point controller Through push button with potentiometer
Power supply 230V, 50HZ
Get Best Quote
Yes! I am Interested
X
 

Download Brochure
Explore more products
Unitech Scales And Measurements Pvt. Ltd

Prasanna Kumar N. M.(CEO)
No. 36, Balaji Nagar, Thigalarapalya Main Road, Peenya 2nd
Peenya Balaji Nagar, Bengaluru - 560058
Karnataka, India
Send Email
© Unitech Scales And Measurements Pvt. Ltd. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited